Comparison of advantages between energy-saving and energy-saving air conditioners and ordinary air conditioners

Comparison of advantages between energy-saving and energy-saving air conditioners and ordinary air conditioners

This energy-saving air conditioner has several major characteristics that differ from traditional ones:

1、 Traditional air conditioning. Traditional air conditioners use cooling media to dissipate heat through air, resulting in low heat conversion efficiency and low refrigeration capacity. Our evaporative water cooled air conditioners have high heat conversion rates and fast cooling through water exchange, which results in low compressor load, low current, and large refrigeration capacity.



2、 Traditional air conditioning indoor units have low evaporation capacity, and the compressor is located outdoors. The exchange area of hot and cold air is small, the cold air volume is small, and the cooling capacity is relatively small. Our company's main air conditioning refrigeration compressor and indoor condenser evaporator are integrated, with a large evaporation area. Equipped with large vortex fan blades, the cooling capacity and heat exchange capacity of the fan mechanism are more than four times that of traditional air conditioners. At the same time, the indoor cold air is sucked in for repeated circulation. After passing through the condenser evaporator, it is equivalent to the principle of internal circulation of cold and hot exchange, with fast cooling and low cooling power loss, The refrigeration capacity is large, and the refrigeration power is more than three times the refrigeration efficiency of traditional air conditioning units with the same power, thus achieving a very high energy-saving and energy-saving effect.





3、 The traditional 5.5 horsepower air conditioner can only accommodate an area of around 100 square meters, while our 5.5 horsepower air conditioner can accommodate an area of 200 square meters.






4、 The traditional indoor unit and outdoor unit of air conditioning were originally installed and connected by copper tube welding. The cost of copper tube connection is high, and it requires professional personnel to install. After installation, it also needs to be refilled with liquid, which is complex and troublesome to install. Moreover, it is easy to cause liquid leakage and poor cooling effect. The distance between the indoor unit and the outdoor unit is not suitable for too long. Our company's evaporative water source energy-saving and energy-saving air conditioning system is easy to install, with an integrated design of the main unit. There is no need to connect the indoor unit with the outdoor unit through copper pipes, and ordinary PVC or PE pipes can be used to connect, and a tap water pipe can be introduced. The distance can reach several tens of meters, or it can be installed on the ground or roof. It can be installed without the need to be installed under the window or exterior wall, and is not affected by environmental installation. Compared with traditional water fans installed on windows, It does not affect indoor lighting and other seasonal lighting and windward effects. Maintain the overall appearance and aesthetic effect of the house